Environmental control system application

Product ID: Environmental control system application

 ntelligent control host (環境控制主機)

Design and plan various nodes according to the needs of each field. Using the IOT for remote integrated control management

App and mobile phone can monitor at the same time.

Disconnection of the network does not affect the use, and the controller can continue to operate.

Additional sensors can be quickly configured.

 

Direct upgrade to existing equipment (直接升級舊有設備)

After evaluating the existing equipment in each field, it can be integrated into the smart host.

Set by the cloud system, data can be stored locally and can be operated normally even when the network or power is cut off.

In case of emergency (flood, fire, sudden rainfall), changes and adjustments can be made immediately.

 

Environmental control system application
early warning system

• Phase loss analysis and detection
• External contact abnormality detection
• Over or low voltage alarm detection
• Minimum air volume detection

 

Easy to install (built-in sim card)

 

Applicable fields (適用場域)

1. No WIFI in the venue (4G network card) 無WIFI

a. Can be used without WIFI

b. Built-in battery, if there is a power outage in the field, the operation of the equipment will not be affected.

 

2. There is WIFI in the venue 有WIFI

a. Can be used when WIFI is available

b. Update one piece of data every minute

c. Record every ten minutes

d. Can save transmission costs

 

3. Whole site monitoring 整場監測

▲ Requires an environmental control host

a. Contains a set of host devices

b. Can store data in local devices

c. Multiple sets of sensor data can be connected in series

d. Can be connected to WIFI 4G network line

e. Update information in real time

f. Can be upgraded to an environmental control host